Our philosophy: ‘Work with integrity, provide quality… Gain trust & loyalty”.
Fire Damper Testing
At DECA Environmental Services Ltd, we provide professional fire damper inspection, testing and maintenance services across the UK, helping building owners and facilities managers maintain effective fire protection within their ventilation systems.
Maintenance and Servicing
Fire damper testing and maintenance is essential for ensuring dampers operate correctly in the event of a fire. Regular inspections help identify faults, maintain compliance with fire safety regulations, protect building occupants, and prevent the spread of fire and smoke through ventilation systems.
There are different types of fire damper:
Automatic dampers – generally controlled by a building management system, these will close when a fire alarm is triggered
Manual dampers– these are spring loaded dampers which are held open by a fusible link – these are temperature controlled. In the event of a fire when the temperature reaches above 70 the fusible link will melt and activate the damper. The Damper closes thus forming the barrier between the fire compartments.
DECA Environmental understands that regular fire damper testing and maintenance ensures that dampers remain fully operational, helping to contain fire, protect occupants, and maintain compliance with fire safety requirements.
Legislation
The Regulatory Reform (Fire Safety) Order 2005 sets out requirement for service and places duty on building owners to ensure Fire Damper testing is carried out.
BS9999 provides the standard for fire safety operations in buildings including the maintenance of fire dampers and other fire safety systems.
How do we test?
‘The drop test’ This is carried out by releasing the damper from its link to ensure full operation. The damper is then reset and confirmed. If the damper does not close, if operation is impeded, the damper test is failed for remediation and repair.
How often must fire dampers be tested?
BS9999 states that fire dampers must be tested annually to ensure their safe operation. A full report must be provided for your records. In recent times the onus has been placed on testing to be carried out to all fire systems, without fail.
Inspection and Testing Requirements
Guidance from Building Engineering Services Association and Health and Safety Executive recommends regular inspection and testing.
Typical frequencies are:
| Building Type | Recommended Testing Frequency |
|---|---|
| Most commercial buildings | Annually |
| Hospitals and healthcare premises | Every 6 months |
| High-risk environments | Based on fire risk assessment |
Testing generally involves:
Locating and identifying each damper.
Checking accessibility.
Operating the damper to ensure full closure.
Inspecting blades, seals, fusible links, and actuators.
Recording results and defects.
Labelling the damper with the test date.
Common Issues Found During Surveys
Dampers inaccessible above ceilings or within risers.
Missing identification labels.
Damper blades seized or obstructed.
Damper installed incorrectly.
Missing access panels.
Corrosion or physical damage.
No maintenance records.
Any of these defects can prevent the damper from closing during a fire.